The Ultralight Panohead is compact, lightweight, and easy to use for shooting 360° x 180° spherical panorama photos. Originally designed for extended hiking and bicycle trips, the new design with click stops is adaptable for use in multiple scenarios.
This version is for the Nikkor 10.5mm f2.8 Fisheye Lens. The lens is originally designed for APS-C sensors, but can also be converted for use on full frame sensors, if the lens hood is shaved. With an APS-C sensor, a panorama can be completed in 6 shots around and 1 hand nadir shot, in diagonal orientation. With a full frame sensor and shaved lens hood, a panorama only needs 3 shots around and optional hand nadir.
|APS-C sensor (1.5x crop factor) produces a rectangular image with approximately 179° FOV corner to corner, which requires the lens to be shot diagonally with 6 shots around. There is a star shaped nadir hole, which can be reduced if shooting 8 shots.||Full Frame sensor (1x crop factor) produces a partially circular image with the sides cut off, and only needs 3 shots around (4 recommended). The lens hood needs to be shaved for the lens to be compatible with a full frame sensor. (we take no responsibility for any modifications you make to your lens)|
|Shots Required||6 + 1||3 + 1|
|Zenith||Not Needed, Captured||Not Needed, Captured|
|Image Resolution||12mp: 11700 x 5850
16mp: 13500 x 6750
|Sensor Coverage||Full sensor||Circle, partially inscribed,
Lens mount needs appropriate adapter.
|Lens Orientation||Diagonal 33-34°||Portrait|
|Lens Mount Type||Nikon||Nikon|
|Notes||No modifications needed||Lens hood needs to be shaved.|
|Clicks: The rotator has selectable clicks of 3, 4, 6 (default), or 8 stops. Please refer to the instruction manual on how to change to a different number of stops.||Aperture: The lens is sharp between f8 - f11. Below f8 it tends to have softer edges and stitch seams. This can be compensated if more shots are taken. A useful feature of the Ultralight Panohead is that the focus ring is free to adjust while the lens is still attached. The aperture is electronically controlled by the camera body.||Rotator Lock: When shooting 360 videos or time lapse, unintended rotation can be prevented by using the rotator lock. It is designed to only resist the weight of the camera against gravity. It is not intended to resist rotation by force. Finger tight only; do not overtighten the screw or attempt to rotate while locked, or damage may occur.|
|Control Points & Lens Shift: During stitching, your software may create control points which could cause misalignment. There should only be control points between adjacent images. For example, image 3 should only have points with 2 and 4. If 3 and 5 have control points, delete them. Also, for a better stitch, the software optimizer should aways be set to "Heavy Lens Shift." (Software is not included)||HDR & Exposure Fusion: When shooting scenes with a wide dynamic range between shadows and highlights, multiple exposures can help create a more evenly exposed shot. This would require the use of a tripod, and it is recommended to use a shutter release or remote control to prevent moving the camera during shooting. Cameras with Auto Exposure Bracketing (AEB) is a helpful feature. Always shoot in full manual mode and manual white balance, and optionally shoot in RAW format for better image quality.||Mobility & Monopods: Shoot with a monopod for quick and easy panoramas. Single exposure is only possible, but usually this would be taken outdoor where the lighting is more even. If it is dark, you can increase ISO, as long as you are able to shoot faster than 1/30 to 1/60 seconds. To keep the lens as close to the nodal point as possible, look at the built in bubble level, or use the Manfrotto Autopole Spirit Level which can be attached directly to the monopod (not included).|
Compatible with all models
Compatible with all models
requires shaved lens hood
The upper part of the panohead, is printed with Selective Laser Sintering (SLS), which is a method of producing a physical duplicate of a 3D model by using a laser to fuse together particles of powder. The material used for the Ultralight Panohead is a strong Polyamide 12 nylon (PA2200 Material Data Sheet).
When it comes out from the machine, the surface is white and has a rough feel, because the nylon particles are about 60 microns. The parts are then placed in a tumbler with ceramic media for several hours until they are smooth. It is then colored in a vat of black dye for an hour. Afterwards, a layer of 2 component polyurethane clear coat is applied.