Updated with the new selectable 3, 4, 6, 8 click stops. Surface is now the natural nylon material and texture, without polyurethane clear coat. Photos have not yet been updated.
The Ultralight Panohead is compact, lightweight, and easy to use for shooting 360° x 180° spherical panorama photos. Originally designed for extended hiking and bicycle trips, the new design with click stops is adaptable for use in multiple scenarios.
This version is for the Yasuhara Madoka 180 Fisheye Lens for Sony NEX E-mount and Fujifilm X-mount, with an APS-C sensor. A panorama can be completed in 3 or 4 shots around and 1 hand nadir shot.
|APS-C sensor (1.5x crop factor) The lens is an orthographic projection with a completely inscribed circle which is approximately 180° FOV in diameter. It is possible to shoot with only 3 images, while 4 is recommended for better stitches. The panohead has a +7° tilt, which captures the zenith.|
|Shots Required||3 + 1|
|Zenith||Not Needed, Optional|
|Image Resolution||16mp: 6000 x 3000 px|
|Sensor Coverage||Completely inscribed circle|
|Lens Orientation||Portrait or Landscape|
|Lens Mount Type||Sony E-mount, Fujifilm XF-mount|
|Notes||No modifications needed|
|Clicks: The rotator has selectable clicks of 3, 4 (default), 6, or 8 stops. Please refer to the instruction manual on how to change to a different number of stops.||Aperture: The Yasuhara Madoka 180 Fisheye Lens is sharpest between f8 - f11. Down to f4, there is not much change in sharpness. As the edges are soft due to compression from the projection, this can be compensated if more shots are taken, which is why 4 shots is recommended. A useful feature of the Ultralight Panohead is that the Yasuhara Madoka lens can also be shot in landscape orientation, and the lens settings can still be read via viewports on the top of the panohead.||Rotator Lock: When shooting 360 videos or time lapse, unintended rotation can be prevented by using the rotator lock. It is designed to only resist the weight of the camera against gravity. It is not intended to resist rotation by force. Finger tight only; do not overtighten the screw or attempt to rotate while locked, or damage may occur.|
|Control Points & Lens Shift: During stitching, your software may create control points which could cause misalignment. There should only be control points between adjacent images. For example, image 3 should only have points with 2 and 4. If 3 and 5 have control points, delete them. Also, for a better stitch, the software optimizer should aways be set to "Heavy Lens Shift." (Software is not included)||HDR & Exposure Fusion: When shooting scenes with a wide dynamic range between shadows and highlights, multiple exposures can help create a more evenly exposed shot. This would require the use of a tripod, and it is recommended to use a shutter release or remote control to prevent moving the camera during shooting. Cameras with Auto Exposure Bracketing (AEB) is a helpful feature. Always shoot in full manual mode and manual white balance, and optionally shoot in RAW format for better image quality.||Mobility & Monopods: Shoot with a monopod for quick and easy panoramas. Single exposure is only possible, but usually this would be taken outdoor where the lighting is more even. If it is dark, you can increase ISO, as long as you are able to shoot faster than 1/30 to 1/60 seconds. To keep the lens as close to the nodal point as possible, look at the built in bubble level, or use the Manfrotto Autopole Spirit Level which can be attached directly to the monopod (not included).|
|Sony NEX and Alpha E-mount
Fujifilm X-mount, XF
Compatible with all models
The upper part of the panohead, is printed with Selective Laser Sintering (SLS), which is a method of producing a physical duplicate of a 3D model by using a laser to fuse together particles of powder. The material used for the Ultralight Panohead is a strong Polyamide 12 nylon (PA2200 Material Data Sheet).
When it comes out from the machine, the surface is white and has a rough feel, because the nylon particles are about 60 microns. The parts are then placed in a tumbler with ceramic media for several hours until they are smooth. It is then colored in a vat of black dye for an hour. Afterwards, a layer of 2 component polyurethane clear coat is applied.